GS724T Firmware Version 1.1.4 (0618)

GS724T Software Revision 1.1.4 (0618)

Published Jun. 28 2004

Correction

• Using fiber cable on combo ports 23 and 24 to connect the switch to other network equipments, sometime the link might fail to come up.

Installation Procedure (also located in your documentation)

1. Download the new firmware and store into a known location in your local system (e.g., \download) which you will need in the next step
2. Start Smartwizard Discovery utility, which is included on the CD that came with your Smart Switch. If you have not installed, please install it
3. On Smartwizard Discovery window, click Discover to locate your Smart Switch. The switch will be listed in the device list table once it is found (Note: Smartwizard Discovery uses broadcast packet to locate Smart Switches. This means that it can only locate Smart Switches located within the same routing domain)
4. Highlight the Smart Switch to upgrade and click “Firmware Upgrade” and follow the screen prompts to complete the upgrade. Smartwizard Discovery will report a successful completion at the end of update

Document Type:

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.